HNB Equipment
SPECIFICATIONS
SPALECK 165T
WORKING POSITION
Length 15.310 M
Width 13.660 M
Height 4.790 M
Weight 30,900 Kg
CAPACITY
Max. 600t/h throughout capacity deepening on the material and screen deck
TRANSPORT POSITION
HOPPER CAPACITY
Length 15.004 M
Width 3.000 M
Height 3.430 M
Weight 30,900 Kg
8.7 m^3
15 m^3 with extended hopper walls
TRACKS
Length 10' 10"
Width 15.7"
Height 29.4"
Max Speed 0.5 mph
Gradeability 24.5°
Max Slope (side to side) 10°
Attachment to Chassis Bolt on
FEED CONVEYOR
Belt Width 55"
Belt Spec Plain Sw630/2 9+3
Adjustable Speed 0-0.24 m/s
COLLECTION CONVEYOR
SCREENBOX
Belt Width 55"
Drive System Direct Drive with Flexible Coupling
Screenbox Angle 15°- 20°
Adjustable Screen Stroke 6-10mm
Screen Shaft Speed Factory set at
1050 rpm
Belt Spec Plain Sw630/2 9+3
Adjustable Speed Max. 2.33 m/s
TAIL CONVEYOR
TOP DECK
Stockpile Height 12' 3"
Dimensions 16' x 5'
Screens 5' x 4' Side Tension
(4 pic)
Tensioning Side tensioned bolted
BOTTOM DECK
Dimensions 15' x 5'
Screens 5' x 5' End Tension
(3 pic)
Tensioning Curve Tension Bar and Adjuster
Angle 12°- 24°
Belt Width 63"
Belt Spec Heavy Duty Chevron
500/3 5+1.5
Adjustable Speed Max. 2.6 m/s
MID PRODUCT SIDE CONVEYOR
Stockpile Height 13'4"@ 26°
Angle 2°- 26°
Belt Width 40"
Belt Spec Plain 400/3 4+2
Adjustable Speed 0-1.75 m/s
POWER UNIT AND HYDRAULICS
FINE PRODUCT SIDE CONVEYOR
Hydraulic Oil Cooler with thermostatic control
Engines:
Caterpillar C7.4 Tier 3a constant speed / Stage 3a constant speed, 98 kW at 2200 rpm
Cummins QSL 3.8 L Stage 5/ Tier 4F 97 kW at 2200 rpm
Total System Flow 91 GPM
Diesel Tank Capacity 88 Gal
Hydraulic Tank Capacity 110 Gal
Stockpile Height 12'4"@ 26°
Angle 2°- 26°
Belt Width 42"
Belt Spec Plain 400/3 4+2
Adjustable Speed 0-2.33 m/s
ENGINE SHUTDOWNS
Low Oil Pressure
ELECTRICS
High Water Temp
Air Filter Blockage
Fuel Contamination
Low Hydraulic Tank Level
Start Siren (10s Delay)
Optional Radio Control Tracks
Pendant Track Control
(Plugged in at Feeder End with E-Stop)
Flashing Beacon and Siren
(When Tracked)
SAFETY FEATURES
CE Compliance
External Belt Alignment Points
Side Conveyors will Lower Horizontal for Maintenance
Full Safety Guarding for Nip Points
Engine Safety Shutdown Systems
Emergency Stops:
4 pcs. 2 at Power Unit RH & LH 2 at Tail Conveyor